A QINGDAO ZONGDA product-series websiteLOAD • HAUL • DUMP
ZDL307 technical reference — ZDL307 photograph from its original technical specification, not the ZDL307L model.
ZDL307 photograph from its original technical specification, not the ZDL307L model.

ZDL307 technical reference

ZDL307 7 t Diesel LHD Loader Manufacturer

A documented ZDL307 reference configuration with a 7 t rated load and a 3 m³ bucket. Confirm current model availability before ordering.

Discuss configuration, documentation and delivery terms directly with ZONGDA.

SPECIFICATION REVIEW

ZDL307 technical reference reference data

Published reference configuration
Rated load7 t
Bucket capacity3 m³
Dimensions (L × W × H)9250 × 2600 × 2250 mm
Operating weight19.5 t
Engine rated output165 kW at 2200 r/min
The source lists at least 4 m × 4 m headings, route outside turning radius at least 9 m and slope no more than 14°. It excludes flammable/explosive gas and coal-dust environments. See the technical document for the full environmental and operating restrictions. Cooling description and steering-cylinder count conflict within the source and are not reproduced.

APPLICATION & PROCUREMENT

Review the working task

The ZDL307 7 t diesel LHD loader technical reference preserves the model identity and configuration described in the supplied technical document. It lists a 7 t rated load and a 3 m³ bucket for underground loading and short-distance transport. This information can help identify an existing machine or frame a comparable equipment requirement. It does not establish current availability for a new order.

ZDL307 and ZDL307L are kept separate. The public ZDL307L catalogue entry identifies the model with the L suffix; it is not the source of the ZDL307 specifications here. For the latter, use the supplied ZDL307 technical document and request confirmation of the machine or configuration you intend to purchase.

Include in your inquiry

  • Exact machine nameplate and model suffix
  • New equipment or replacement requirement
  • Route dimensions and current specification request
Prepare Model Inquiry

Configuration and selection

The reference gives overall dimensions of 9250 × 2600 × 2250 mm, an operating weight of 19.5 t and rated engine output of 165 kW at 2200 r/min. Record these as archived configuration data. If you are identifying an installed machine, compare its nameplate and available documentation before assuming that every component matches this reference.

For a replacement inquiry, explain what must remain compatible: access route, loading arrangement, receiving equipment or existing maintenance documentation. Ask the supplier to distinguish the archived specification from any current proposal. The ZDL307L product page may be relevant to a separate comparison, but its model name must not be shortened to ZDL307 or used to fill gaps in this document.

Application requirements

The source describes trackless loading and short-distance transportation in conjunction with mining trucks. A practical inquiry might concern an existing ZDL307 whose owner needs to discuss replacement equipment. In that situation, provide the machine identification, the present task and the changes required. Ask for a clear statement of which model and configuration the new offer covers.

The source also sets application restrictions, including headings at least 4 m × 4 m, an outside route turning radius of at least 9 m and road slope no greater than 14°. It excludes environments containing flammable or explosive gas and coal dust. These are document restrictions, not a complete site approval checklist. Read the full document and have the proposed application reviewed; the summary here is not an operating instruction.

Supplier quotation and scope of supply

Begin a ZDL307 supplier inquiry by saying whether you need machine identification, a new-equipment proposal or a replacement-related discussion. Attach nameplate details where available. For new procurement, ask whether the documented configuration is currently offered and request the specification of the actual proposal. Do not infer stock, production status or delivery timing from the existence of an archive document.

  • Keep the exact model and suffix on each attachment and comparison sheet.
  • Provide material, duty, route information and receiving equipment for a replacement assessment.
  • Ask the manufacturer to identify document revisions and differences from the archived configuration.
  • Request separate confirmation of commercial terms, documents and any service scope.

The original document contains conflicting descriptions of engine cooling and steering-cylinder quantity. Neither is resolved on this page. If either affects your requirement, ask for configuration-specific confirmation rather than choosing whichever sentence suits the comparison. For a factory review or inspection request, state the evidence you require and have its availability addressed in the offer.

See the LHD quotation checklist for organizing a new inquiry around the actual requirement.

ZDL307 technical reference procurement FAQ

Is this a current ZDL307 sales specification?

It is a technical reference based on the supplied document. Current availability and the specification of any proposed machine must be confirmed with the supplier. An archived model page does not establish an orderable configuration.

Can these figures be used for ZDL307L?

No. This reference does not establish equivalence between the models. Keep ZDL307L separate and request its own technical sheet, particularly for dimensions, load and the proposed machine configuration.

What are the documented load and bucket figures?

The supplied ZDL307 document lists a 7 t rated load and a 3 m³ bucket. Those values belong to the reference configuration and do not automatically describe a current replacement offer.

Why are some component details omitted?

The source gives inconsistent cooling and steering-cylinder descriptions. Omitting those disputed details prevents the reference from presenting an unresolved choice as fact. Use current machine documentation or a confirmed supplier specification to settle the requirement.

Ordering and after-sales support

Can I request a loader configuration for my mine?

ZONGDA accepts requests to customize product specifications. For a loader, describe the material, access constraints and truck-loading interface so the team can review the changes you need. The accepted configuration and drawings should be identified in your offer.

How should I plan the order schedule?

ZONGDA's published general guidance is usually one to two months for regular orders. It also mentions expedited production and occasional stock. Send your required delivery date with the model and destination; ask for current availability and an order-specific schedule before making a site plan. This general timing is not a stock or delivery guarantee for this loader.

What support can I discuss before ordering?

Online and local technical after-sales support are described in ZONGDA's service information. Installation, commissioning and spare-parts supply are also listed. Include your maintenance needs in the inquiry and agree the support location, scope and warranty terms for the supplied machine.

Payment, delivery and service arrangements

Discuss This Order

Source document and next checks

Read the original supplied technical document alongside these selected reference figures. Confirm the current revision and configuration in your quotation.

Open original technical file (DOCX)

Next, identify loader spare parts before ordering.

Next, prepare the machine inquiry checklist.

SPECIFY YOUR REQUIREMENT

Bring the operating conditions.
Request the right configuration.

Include loading duty, route clearance, truck interface, quantity and delivery destination in your inquiry.

Request a Technical Quote