A QINGDAO ZONGDA product-series websiteLOAD • HAUL • DUMP

LHD Loaders / Selection Guides

LHD Loader Spare Parts Checklist: Identify Parts Before You Order

Identify underground loader spare parts with model and serial numbers, assembly location, drawing references, supply scope and a copyable procurement checklist.

This LHD Loader Spare Parts Checklist helps you turn a request such as “rear differential needed” into an order that a supplier can identify and quote. Start with the machine model and serial number, then establish the assembly location, catalogue reference, quantity and exact supply scope. Keep proposed substitutions separate until your technical team approves them in writing.

This guide belongs to our underground loader purchasing guides. It covers parts identification and purchasing records, not fault diagnosis or repair instructions. If you're buying a new loader together with initial spares, use the LHD loader RFQ checklist to keep the equipment specification and its parts package connected.

1. Identify the machine before naming the part

Put the machine model, complete serial number and your fleet asset number on the first page of the enquiry. Attach a readable nameplate photograph. Your internal asset number helps your team route the purchase; it shouldn't replace the manufacturer's serial number.

Record the installed assembly's identification as well. If an axle, engine or other assembly has previously been replaced, the machine's original build record may need reconciliation with what is installed today. Mark an unreadable plate as “unconfirmed” rather than guessing the missing characters. Assign someone to resolve that gap before order release.

Epiroc's Techinfo description illustrates this identification approach: its documentation search accepts machine numbers, serial numbers and part numbers to locate information for specific equipment. This is a reference to a documentation method, not a claim that ZONGDA supplies or supports Epiroc parts.

2. Record location, drawing reference and revision

“Differential assembly” is too broad for a purchase line. State front or rear axle, the assembly designation, the number shown in the parts catalogue and the relevant drawing or illustration position. Keep the illustration's item number in a separate field from the orderable part number. They serve different purposes.

Attach the catalogue page with its document identifier and revision where available. A cropped picture containing only a circled component can lose the title and applicability information that the supplier needs. Include an overall view and a close view of markings; label them consistently with the purchase line.

Our technical documents provide a useful identification example. DIFF-0017 identifies a differential and carrier assembly, reference 5541 5291 00, for the rear axle of the FL04 loader. DIFF-0018 identifies the front-axle assembly, reference 5541 5290 00, with a NO SPIN unit. These references describe different locations and configurations. They are FL04-specific documentation examples, not evidence of interchangeability with ZDL307 or any other loader.

3. Specify what the quoted assembly includes

Ask the supplier to list the supplied components and exclusions. Does the price cover a complete assembly, an individual component or a kit? Have the quotation identify any seals, fasteners or associated items included in that scope, rather than inferring contents from a photograph.

For each line, distinguish the quantity of assemblies from the number of individual items inside a kit. “Two kits” without a contents list makes receiving inspection difficult. A useful quotation gives the kit reference, its contents and the quantity of each included item.

Sandvik's Performance Fluids brochure, page 27, describes maintenance kits selected for machine model, configuration and maintenance interval, with serial-number assistance; it includes an underground-loader example. That illustrates why a kit needs an applicability check. It does not establish compatibility between Sandvik kits and ZONGDA equipment.

4. Keep fleet spares separate from a new-machine package

For an existing fleet, group requests by machine serial number and assembly. Combine quantities only after the technical team confirms that the same part applies across those machines. A shared commercial model name alone shouldn't be your approval record.

For a new-machine order, ask for the proposed initial spares list against the final equipment configuration. If your enquiry concerns the ZDL307 underground loader, identify it explicitly and request the corresponding parts documentation; don't transfer the FL04 references above into its order.

Bucket-related enquiries also need the installed bucket identification. The payload and bucket-volume guide helps define the machine selection question, but rated payload and nominal bucket volume do not establish a wear part's dimensions or attachment details. Ask for the applicable drawing and reference.

5. Copy this purchasing checklist into your enquiry

Use one copy per purchase line or clearly identified group of identical parts. “Not available” is a useful answer when it triggers a document request. A blank field is easier to overlook.

Request reference / date:
Buyer and technical contact:
Delivery destination and required arrival date:
Machine model / complete serial number:
Fleet asset number:
Installed assembly model / serial number:
Assembly location: front / rear / other:
Requested part description:
Catalogue part number:
Drawing number / revision / illustration item:
Photograph filenames and markings:
Required quantity and unit:
Supply scope: component / complete assembly / kit:
Required kit contents and associated items:
Known assembly replacements or modifications:
Requested documentation and identification labels:
Proposed alternatives: quote separately:
Technical approver for any substitution:
Open identification questions:

Send the relevant pages from your records alongside this checklist. Our technical document library provides reference material, but the supplier still needs to connect the requested item to your machine. Keep the enquiry, replies and final approved reference together in the purchasing file.

6. Require written approval for substitutions

If the requested number is unavailable or superseded, ask the supplier to distinguish an official replacement reference from a proposed alternative. Request the basis for applicability and a clear statement of differences in configuration, supplied contents and required associated items. A similar appearance is not sufficient evidence.

Record your technical team's written decision against the exact quotation revision. If information is insufficient, leave that line on hold while proceeding with clearly identified lines where appropriate. Don't let a general commercial acceptance silently approve a technical change.

The final purchase order should carry the approved reference and supply scope. Keep superseded references as searchable history, clearly marked, so a later repeat order doesn't accidentally return to an earlier proposal.

7. Compare quotations on the same purchasing basis

Build a comparison with separate columns for requested item, offered item, technical status, included contents, quantity, price basis and delivery conditions. Label unmatched or incomplete offers as pending clarification. A lower line price means little if one supplier priced a component and another priced a complete assembly.

Ask each supplier to state availability and the basis of its delivery estimate for your order. Separate readiness for dispatch from expected arrival at your destination. Confirm packing, shipping documents, payment terms and the process for handling shortages or identification discrepancies. These are quotation questions, not assumed services.

8. Inspect the delivery against the approved order

At receipt, reconcile the packing list with purchase-line quantities and the identification on the delivered items. Record visible packaging damage, missing labels, mismatched references and incomplete kit contents. Photograph discrepancies while retaining the relevant packaging and documents.

Hold a disputed item from installation until the supplier and your responsible technical team resolve its identity or condition. Receiving acceptance records should reference the approved quotation or purchase order; they do not replace installation checks or the equipment manufacturer's procedures.

Ready to request a parts quotation? Contact ZONGDA with your machine identification and parts checklist. Include the unresolved questions as well as the known references. A useful first reply should confirm what can be identified and state what evidence is still needed before a firm offer.

Equipment to review

Reference model information and original technical sources are linked on the equipment pages. Confirm the proposed configuration and site requirements before purchase.

SPECIFY YOUR REQUIREMENT

Bring the operating conditions.
Request the right configuration.

Include loading duty, route clearance, truck interface, quantity and delivery destination in your inquiry.

Request a Technical Quote